• Home
  • Main
  • Is it easy to scratch wood floors?
https://soukboard.com/wp-content/uploads/2021/12/pexels-photo-164005-960x600_c.jpeg

Is it easy to scratch wood floors?


Wood floors are prized for their beauty, warmth, and durability. However, homeowners might be worried about scratching wood floors. It all depends on what wood you use. Wood flooring isn’t as scratch-resistant as tile or stone, but some wood types are more difficult to scratch. The type of wood used, the grain pattern, and whether the flooring is protected with a hard coating will determine how scratch-resistant it is.

Take a look at the Janka Rating

Hardwood floors can be rated using the Janka hardness scale. This scale assigns a hardness rating to wood floors based on their resistance to indentation. It measures how much pressure it takes for a mark to form in the wood. The wood is more difficult to scratch the higher the rating. Red oak, for example, has a rating of 1,290. It doesn’t easily scratch during normal wear and tears such as foot traffic and sliding a dining table chair over it. Hickory has a rating of 1,820, making it even more difficult. Brazilian walnut is almost three times harder than red oak, with a rating of 3,680. Softwoods are lower on the scale which means they are less resistant to damage and scratching. Douglas fir, on the other hand, is rated at 690.

Hardwood or softwood

Both hardwoods and softwoods can be used for laminate flooring Wirral, but they have different scratch resistance. Hardwoods like pine, spruce, and fir are more prone to scratching with regular use. They are therefore better suited for areas in your home that aren’t subject to a lot of foot traffic, such as a bedroom. Hardwoods like oak, maple, and birch are more resistant to scratches than softwoods. These woods are great for high-traffic areas like your living room or kitchen, where furniture is frequently slid across the floor or dropped onto the floor.

Grain Pattern and Cut

The floor’s wood grain pattern can affect its scratch resistance. Because of their tight grain patterns, hardwoods such as oak are more resistant to scratching than those with a wider grain. How floorboards are cut can also affect how durable the wood will be. Quarter-sawn flooring has an edge or vertical grain. It is, therefore, more resistant to wear and will not show scratches easily. Plain-sawn flooring is flat in grain and can show visible grain patterns. This flooring type may not last evenly and may show more scratches.

Improved scratch resistance

Protective finishes are the best way to protect your wood floor from scratches. While penetrating sealers can be applied to wood to protect from moisture, they do not offer scratch protection. Polyurethanes or varnishes create a protective coating on the surface that resists moisture, scratches, and stains. Wood floors can scratch easily, but the finish on the surface is not impervious to moisture, scratches, and stains. Therefore, they are usually refinished at least twice every two to three years.

Catherine Morales

Other posts by

Menu